Flat-Tie Aluminium Alloy Wall and Column Formworks

Flat-Tie Aluminium Alloy Wall and Column Formworks

1、System

Flat-Tie + Hollow Section + Aluminium Formwork + Steel Accessories

  • Materials for wall and column formworks with embedded flat-ties:
    • Embedded flat-ties; b. Aluminium alloy wall panels with grooves at their edges; c. Hookies; d. Hollow sections; e. Flat-tie raking shores; f. Pins and wedges
  • Materials for wall and column formworks with reusable flat-ties:
    • Reusable flat-ties; b. Flat-tie sleeves; c. Aluminium alloy wall panels with grooves at their edges; d. Hookies; e. Hollow sections; f. Flat-tie raking shores; g. Pins and wedges
  • The features of flat-tie system:

The formwork reinforcement system of flat-tie type has lighter accessories in weight. It has smaller gaps for the distances between raking shores, which makes it more flexible for precision adjustments and more convenient for verticality control. Therefore, the casting result of the concrete wall using flat-tie reinforcement formwork system has better verticality. There is no obvious holes left in the concrete wall upon the dismantlement of the formwork system with embedded flat-ties, as the 2 edges of the flat-tie will be cut by using particular tools. Therefore, the cost for hole filling afterwards can be saved up, while the waterproof construction quality for the wall body is more guaranteed.

Tie-Rods + Walers + Aluminium Formwork + Steel Accessories

  1. Materials for wall and column formwork using tie-rod system
  2. Tie-rods; b. Aluminium alloy wall panels; c. Walers; d. Hexagonal nuts; e. Gaskets; f. Waler brackets; g. Tie-rod raking shore
  • The features of tie-rod system:

The main components of the tie-rod reinforcement system are tension tie-rods, walers and raking shores. The functions of these components are integrated to guarantee the strength, durability and stability of the system. Upon the completion of the tension tie-rod and waler reinforcement, the stability of the overall wall body will become stronger. After the tie-rod formwork system is dismantled, many tie-rod holes will be left in the wall body, where special waterproofing measures should be done to the tie-rod hole positions.

2、Application Scope:Typical floors, similar house type and others; Apartments; Office towers; Terrace houses; Hotels